unit Installations

Steel building framework is made of rolled sections (primary cleaned, primed and coloured box iron or angle). Rigidity of the frame is reached due to the rigid connection of the construction components. Junctions of the frame components are welded. The frame can as well be made of wood (100.50 mm beam) which reduces the price of the construction.

Roofing is made in order of per sheet adjustment. Outer skin is made of profiled sheet ПР-15. 50 mm heat insulator ПСБ-25 is used for the heat isolation. Vapor and hydraulic barriers are used for vapor and hydraulic sealing.

Floor is covered with linoleum. The basis which is out under the linoleum is 25 mm thick board layer and wood particle board layer. 50 mm heat insulator ПСБ-25 is used to ensure floor heat isolation.

Walling of the building is made in order of per sheet adjustment; 50 mm heat insulator ПСБ-25 is used. Outer skin is made of profiled sheet ПР-15. Interior panelling is made of lining on the walls and plastic lining on the ceiling.

Windows are made of metal-plastic of 1,2х0,8 m size, outer (heat sealed) doors are made of metal of 0,8х2,0 m size with mortise lock.

1(2) items of ‘Duel’ type lamps and 1(2) items of switches arte provided for the illumination. Conductor cable of ПВС 3х2,5 and 2х1,5 type are used for the illumination and connection of wall outlets. Two automatons in the shield are provided at the entrance.

At the separate request the project can be completed with the entities of sanitary engineering, in particular shower carbine, lavatory bowl, washbasin, boiler, continuous heater, electric panels, etc. Protective and metal bars may be installed on the windows.